The 100A 4-Pole ATS (Automatic Transfer Switch) is a 4 pole three phase switch, which means it can only be used in conjunction with a three phase generator, up to 100 amps. It’s also easy to install and can be configured by any competent electrician in a very short space of time. The other major benefit of this particular transfer switch is it’s dimensions. It is only 300mm x 300mm x 200mm, ensuring it can be placed easily in a convenient location near your consumer unit.

The ATS panel is modified and fitted with a 12v/24v battery charger to keep the battery on your backup generator charged when it is not in use. Sometimes you can go months without having to use a backup generator, and the time it sits idle can run the battery down, so this slight modification is a welcomed addition to an already very appealing ATS system.

This ATS is compatible with a vast range of generators that we stock. It will work with all Hyundai 3 Phase 1500RPM sets up to the DHY65KSE and the 3 Phase output for the 3000RPM DHY8000SELR-T.

The ATS panel would be installed by your engineer in between the consumer unit and meter at your property. Then, the 20m communication cable is wired from the ATS panel, to your generator which can be situated up to 20metres away. This communication cable is what allows the ATS to turn the generator on and off. However, please note this package does not include mains cable (the cable which carries power from the generator). Mains cable needs to be specified by your electrician and sourced accordingly.

This package ensures that even when you are at work, on holiday or away from your home/office, in the event of a power cut your appliances stay on.

• 100Amp ATS Panel
• 1500RPM ATS plug (3000RPM ATS plug for DHY8000SELR-T)
• 12V Battery Charger (24V if bought with the DHY65KSE)
• 20metres of communication cable to link the generator to the ATS panel to allow it to be turned on and off via the ATS panel
• Complete automatic transfer package for use with 3 Phase Hyundai 1500RPM diesel generators up to the DHY65KSE and the 3 Phase output for the 3000RPM DHY8000SELR-T
• Automatically transfers the source of power from the mains to your generator
• Fitted with a battery charger to ensure your generator is ready to work even after a long period of inactivity
• 4 Pole, 100Amp
• Three Phase